To Install the CodeMeter Runtime without the .NET Framework components, please proceed as follows: 1. Open commandline (DOS-Box) as administrator. Type "cmd" in Windows search and right-click on the e more
In case of difficulties during CodeMeter installation or uninstallation, the installer logs are required for further investigation. These logs are located in the temp directory of the user who perform more
In such a case, it may help to give CodeMeter full disk access. To do this, please proceed as follows: 1. Open System Preferences. 2. Navigate to System Preferences Security & Privacy more
EBL stands for "ExecuteBciLow". And Bci for "Basic Command Interface". Here corresponding commands are sent to the CmDongle and then evaluated or processed there. Accordingly, errors can also occur, w more
If the CmDongle is not recognized as a device by Linux-Embedded, the CmDongle must be mounted with increased rights. For HID-Dongles (Human Interface Device) enter the command: sudo chmod o+rw /dev/hi more
If those errors display, errors in the USB communication with the CmDongle have been occurred. If the communication after several attempts still fails, finally Error 70 displays and no further communi more
For older CmDongles with a specific controller version, there is no firmware version 2.x, because these controllers do not possess sufficient memory for the changed firmware update procedure that was more
Depending on the BIOS and the configuration of the boot manager of your system, it might occur that your system hangs during boot procedure. This happens because the system tries to boot from the CmDo more
There may be several reasons for this: - By default, all CmDongles 3-xxx (without flash memory) are delivered with HID configuration. Thus the CmDongle is detected as a potential keyboard or mouse dev more
The error 106 refers to an "invalid handle" and occurs if a handle was used CodeMeter does not know. This may, for instance, happen in the following cases: 1. You use a protected software or a softwar more